Clip copy, Figure 3-57, Clip copy screen – Honeywell HRHD 410 User Manual
Page 90
Configuration
Rev 3.01
72
Document 900.0315
10/05
Clip Copy
Use the Clip Copy screen to copy video to an internal CD-RW drive, or external USB
hard disk drive, or USB flash drive. The copied clip images can be viewed on computers
running Microsoft Windows 98, ME, 2000 or XP. Refer to
for information on preparing the external drive for back up.
Highlight Clip Copy (MENU
➤
Config
➤
Clip Copy) and then press # . The Clip Copy
screen displays.
Figure 3-57
Clip Copy Screen
1.
To select the type of drive to use for back up, highlight the box on the top and
then press # . A drop-down list of available drives displays. You can select from
IDE CD-RW, USB Flash Memory, USB HDD, or USB CD-RW.
2.
Place a check mark in the Audio box to archive recorded audio with video.
3.
You can define how much video to copy by changing the start and end times and
dates. You can also select which camera you wish to back up.
4.
Highlight the File Name box and then press # . A virtual keyboard displays (see
). Enter a file name for the video you are copying and select Close. The
DVR automatically adds the camera number (for example, 01) and .exe to the file
name. If you want to save the file in a specific folder, enter the folder name
followed by a / (for example, folder/filename).
5.
After you have given the video a file name, highlight the Start button and then
press # . The DVR displays the drive capacity, the backup file size, and asks if you
want to continue.
When the selected drive has more than two partitions, the following Disk Partition
Selection screen displays. If the file system is not FAT32, the Type displays Not
Supported.