Hand Held Products 4410 - Manual (Page 144)

7 - 14 IMAGETEAM™ 4410/4710 User’s Guide
Serial Programming Commands
Selection
Setting
* Indicates Default Setting
Serial Command
Factory Default Settings Default DEFALT.
Status Check
Show Software Revision REV?.
Show Data Formats DFMBK3?.
Enable All Symbologies ALLENA1.
Disable All Symbologies ALLENA0.
Output Selections
Power PC Revision REVMPC.
Boot Code Revision REV_BT.
Terminal ID TERMID.
Keyboard Country KBDCTY.
Keyboard Style
Regular KBDSTY0.
Caps Lock KBDSTY1.
Shift Lock KBDSTY2.
Emulate External
Keyboard
KBDSTY5.
Automatic Caps Lock KBDSTY6.
Keyboard Modifiers
*Control + ASCII Off KBDCAS0.
Control + ASCII On KBDCAS1.
*Turbo Mode Off KBDTMD0.
Turbo Mode On KBDTMD1.
*Numeric Keypad Off KBDNPS0.
Numeric Keypad On KBDNPS1.
*Auto Direct Conn. Off KBDADC0.
Auto Direct Conn. On KBDADC1.
Communication Settings
*Default All RS-232
Communication Settings 232DFT.
Parity
*None 232PARN.
Mark 232PARM.
Space 232PARS.
Odd 232PARO.
Even 232PARE.