Hand Held Products 4410 - Manual (Page 158)

7 - 28 IMAGETEAM™ 4410/4710 User’s Guide
5F - Uncompressed Gray scale
6F - JPEG image
7F - Outlined image
JPEG Image Quality
xJ (x = 1 - 100)
1J = worst quality
100J = best quality
Pixel Depth:Indicates the number of bits.
8D - 8 bit, gray scale image
1D - 1 bit, black and white image
Image Inversion:Used to invert the image in fix mount applications where the
imager is mounted upside down.
0I - no inversion, default
1I - inversion
Image Capture/Ship and Image Get Commands
Close Image Capture - IMGCAP
The imager command, IMGCAP, sets up the imager to capture and ship an
image the next time the imager’s trigger is pulled. All of the modifiers available
for the IMGSHP command (page 7-27) also are available for the IMGCAP
command to change the look of the image that is output by the scanner. When
using the IMGCAP command, the imager is optimized to capture images of close
objects (e.g., signatures, address labels). The default image file format used by
IMGCAP is a gray scale KIM.
Far Away Image Capture - IMGGET
The imager command, IMGGET, works the same way as the IMGCAP
command, except the imager is set up for capturing images of scenes, similar to
a digital camera. The allowable exposure times that the imager uses are longer
than those for IMGCAP to account for the fact that the imager’s LEDs have little
effect at longer distances. The default image file format used by IMGGET is
JPEG.