Hand Held Products 4410 - Manual (Page 73)

IMAGETEAM™ 4410/4710 User’s Guide 3 - 3
Linear Symbologies
EXAMPLE: Decode only those bar codes with a count of 9-20 characters.
Min. length = 09 Max. length = 20
EXAMPLE: Decode only those bar codes with a count of 15 characters.
Min. length = 15 Max. length = 15
The desired message length and Save must be input after reading this
programming symbol. Refer to the Programming Chart (inside back cover).
Codabar, continued
Check Character
No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, But Don’t Transmit, the unit will only
read Codabar bar codes printed with a check character, but will not transmit the
check character with the scanned data.
When Check Character is set to Validate, And Transmit, the scanner will only
read Codabar bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
Maximum
Message Length
Minimum
Message Length
Validate,
But Don’t Transmit
* No Check Character
Validate,
And Transmit