Honeywell VOYAGER 1200G - Manual (Page 46)

2 - 24
number of retries (from 0-255) by scanning digits from the
Programming Chart , then scanning Save . (5 is the recommended set-
ting.) Default = 0.
Communication Timeout Beeper
This selection programs the scanner to issue an error beep when a
communication timeout has occurred. The error beep sound is pro-
grammed using
Number of Beeps – Error (page 3-4). Default = On.
NAK Retries
This selection limits the number of NAK retries that can occur in ACK/NAK
mode. Scan the bar code below, then set the number of retries (from 0-
255) by scanning digits from the
Programming Chart , then scanning Save .
(5 is the recommended setting.) Default = 0, or disabled.
Timeout Retries
Off
* On
NAK Retries