To clear one or all prefixes or suffixes, To clear one or all prefixes or suffixes -2, Example: add a suffix to a specific symbology – Honeywell VOYAGER 1200G User Manual
Page 74
4 - 2
symbology to which you want to apply the prefix or suffix. For
example, for Code 128, Code ID is “j” and Hex ID is “6A”.
Step 3. Scan the 2 hex digits from the
inside the back
cover of this manual or scan 9, 9 for all symbologies.
Step 4. Determine the hex value from the
on page A-4, for the prefix or suffix you wish to enter.
Step 5. Scan the 2 digit hex value from the
inside the
back cover of this manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.
Step 7. To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
Note: To add a backslash (\) as in Step 7, you must scan 5C twice – once
to create the leading backslash and then to create the backslash
itself.
Step 8. Scan
to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for U.P.C. only:
Step 1. Scan Add Suffix.
Step 2. Determine the 2 digit hex value from the Symbology Chart
U.P.C.
Step 3. Scan 6, 3 from the
manual.
Step 4. Determine the hex value from the
on page A-4, for the CR (carriage return).
Step 5. Scan 0, D from the
manual.
Step 6. Scan
, or scan Discard to exit without saving.
To Clear One or All Prefixes or Suffixes
You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. If you have been entering prefixes and suffixes for single sym-
bologies, you can use Clear One Prefix (Suffix) to delete a specific char-
acter from a symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.