Hoshizaki JWE-620UA-6B User Manual
Page 25
20
b) Service Menu Chart (Auxiliary Code U-1, U-2, U-3, V-0, A-0)
Service
Menu
Item and Details
Setting Range
Display
Factory
Default
01
Wash Cycle Time
(Standard Mode)
1 to 99 seconds
(see no. 08 for multiplier)
1 to 99
41
(41 seconds)
02
Wash Cycle Time
(Long Mode)
10 to 990 seconds
(see no. 09 for multiplier)
1 to 99
11
(11 seconds)
03
Rinse Cycle Time
5 to 60 seconds
5 to 60
6
04
Wash Temperature Setpoint
32 to 167
°
F
(0 to 75
°C)
32 to 167
(0 to 75)
163
(73)
05
Rinse Temperature Setpoint
32 to 185
°
F
(0 to 85
°C)
32 to 185
(0 to 85)
185
(85)
07
Auto Fill Cycle
Rinse pump energized
5 to 30 times
5 to 30
28
08
Wash Cycle Time Multiplier
(Standard Mode)
1x or 10x
1 or 10
1
09
Wash Cycle Time Multiplier
(Long Mode)
1x or 10x
1 or 10
10
11
Wash/Rinse Cycle Start
Initiation
ON: start initiated by closing
door
OFF: start initiated by pressing
"STANDBY/CLEANING" button
on or oF
on
12
Water Temperature Display
ON: wash water temperature
displayed in ready mode or
standby
OFF: rinse water temperature
displayed in ready mode or
standby
on or oF
on
13
Temperature Display Scale
Fahrenheit or Celsius
°
F or
°
C
°
F
14
Internal Booster Tank Energy
Saving Mode
ON or OFF
on or oF
oF
15
Water Temperature Drop for
Internal Booster Tank Energy
Saving Mode
Setpoint minus 0 to 40
°
F
(Setpoint minus 0 to 22
°
C)
0 to 40
(0 to 22)
15
(8)
16
Idle Time Before Internal
Booster Tank Energy Saving
Mode Begins
0 to 99 minutes
0 to 99
15
17
Minimum Internal Booster
Tank Water Temperature to
Start Rinse Cycle (Stop Wash
Cycle) when Internal Booster
Tank Energy Saving Mode is
On
180 to 185
°
F
(82 to 85
°
C)
180 to 185
(82 to 85)
180
(82)
21
through
25
Error Log
Note: To erase the log, press
and hold the up and down
buttons for 3 seconds with one
of the error codes displayed.
The unit beeps once and the
entire log clears.
NA
Most Recent
Errors
21 is most
recent.
"--" is displayed
if the log is
empty.
NA