Hoshizaki JWE-620UA-6B - Manual (Page 50)

45
4. Dishwasher Will Not Start When Door Closed
Setting error
Unit in “STANDBY.” Press “STANDBY/
CLEANING” button to
cancel “STANDBY.”
Dishwater will not start
when door closed
Problem Possible Cause Remedy
Wash/Rinse cycle start
initiation (service
menu item 11) set to
“STANDBY/
CLEANING” button. Change to door switch
start.
Wash Pump Inoperative
Protector tripped. Wait until wash pump
cools.
Locked with foreign
matter. Remove obstacles.
Controller input/output
error. Check input/output
and repair or replace.
Magnetic contactor
defective. Replace.
Protector tripped. Wait until Rinse Pump
cools.
Locked with foreign
matter/ Remove obstacles.
Controller input/output
error. Check input/output
and repair or replace.
Relay defective. Replace.
Rinse Pump Inoperative
Magnet out of position. Set in position.
Door not fully closed. Close completely.
Door Magnet Detection
Error
Magnetic material
caught between door
and tank. Remove.
Door switch out of
position. Set in position.