Hoshizaki JWE-620UA-6B - Manual (Page 49)

44
3. Inadequate Rinse
Low Rinse Pump
Output
Clogged with foreign
matter. Clean.
Rinse water line
scaled. Clean.
Voltage drop. Remove cause.
Inadequate rinse
Problem Possible Cause Remedy
Rinse pump defective. Replace.
Rinse Spray Arms
Low pump output. See “Low Rinse Pump
Output.”
Rinse Cycle Time
Too short. Adjust longer.
Voltage
Too low. Call electrician.
Clogged
Out of position (not
rotating evenly).
Obstructed by cutlery
or other item. Reposition the cutlery
or other item.
Clean.
Set in position.
Rinse (Internal Booster
Tank) Water
Temperature too low. Raise setting.
Dish Rack
Improperly loaded. Load correctly.