HP QMS 1660E - Manual (Page 205)

Storage
Options
6-71 Printer Options
card against the contents of the hard disk and then deletes the
matching files from the hard disk.
Procedure
After you have accessed the Administration/Disk Operations menu,
press the control panel keys in the order shown in the following table.
The printer responds by displaying a status message in the message
window (DSK refers to the hard disk number, and CAR0 and CAR1
refer to the font or card number).
» Note: You may need to press the Next key one or more times to
advance through the list of selections or options.
After the option is removed, remove the card from the slot and place
the printer back on line.
Key Purpose Message
Select Accesses the Administration/Disk
Operations/Remove Option menu. DISK OPERATIONS
REMOVE OPTION
Select Accesses the Remove Option/Dsk#:
menu. REMOVE OPTION
DSK#: x
Next Scrolls through the list of attached
disks. REMOVE OPTION
DSK: x
Select Selects the disk and accesses the card
address from which removal information
is being read. REMOVE SOURCE
CAR#: x
Select Prompts you to insert the font card in
one of the card slots below the printer’s
media cassette. REMOVE OPTION
INSERT MEDIA
Begins reading data from the card and
removing the appropriate fusiform the
hard disk This usually takes several
minutes. REMOVE OPTION
READING DATA...
Acknowledges completion of the
installation process. REMOVE OPTION
REMOVE COMPLETE
Menu Exits from the Install Option menu nd
returns to the Disk Operations menu. DISK OPERATIONS
REMOVE OPTION