HP QMS 1660E - Manual (Page 263)

Updated DOC
Commands
C-17 Document Option Commands
Set Linefeed (Line Termination)
Notes The result of various settings for these parameters is
shown in table below, in terms of the equivalent code
passed to the PCL line termination command
(
<ESC>&k#G ). The second setting (lfiscrlf on, criscrlf
off) is correct for most ASCII listings printed from
UNIX machines. PC listings should usually be done
with both items set to off, and Macintosh listings
usually require the third setting (lfiscrlf off, criscrlf on).
The following table shows the criscrlf/lfiscrlf
commands and the corresponding PCL Line
Termination command parameters.
LFISCRLF CRISCRLF PCL Code Comments
Off Off 0 CR → CR,LF → LF,FF → FF
On Off 2 CR
→
CR,LF
→
CR-LF,FF
→
CR-FF
Off On 1 CR → CR-LF,LF → LF,FF → FF
On On 3 CR → CR-LF,LF → CR-LF,FF → CR-FF
Syntax %%IncludeFeature:lfiscrlf (value)
Purpose Controls the default line termination mode (the <ESC>&k#G
command); specifies the line termination treatment of a linefeed.
Variable value
Purpose Specifies whether a linefeed is treated simply as a
linefeed or as a carriage return-linefeed combination
Range Off/false — Treats linefeed as a linefeed.
On/true — Treats linefeed as carriage return-linefeed
combination
Default Printer configuration dependent