HP QMS 1660E - Manual (Page 68)

Interfaces
QMS 1660E Print System Reference 4-36
Default Job Priority
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
serial interface priority over jobs received via the other interfaces.
Emulation
Sets the serial interface emulation.
End Job Mode
Enables (and identifies an end-of-job sequence) or disables data
stream sensing for the end-of-document (EOD) command. These
sequences allow hosts to enforce print job sequencing without con-
siderations for interacting timeouts. See chapter 5, “Additional Techni-
cal Information,” for details on how to implement this feature on your
QMS 1660E Print System.
Menu Administration/Communications/Serial/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)
Menu Administration/Communications/Serial/Emulation
Choices ESP, Hexdump, HPGL, Lineprinter, PCL5, PostScript
Other optional emulations also appear, if installed.
Default ESP
Menu Administration/Communications/Serial/End Job Mode
Choices None—The printer recognizes only the PostScript ^D
command.
QMS EOD—The printer recognizes only the QMS
%%EndOfDocument command.
HP EOD—The printer recognizes only the HP
<ESC>%12345X command.
Default None