HP 1055CMHP - Manual (Page 151)

Print Quality
6-3 HP DesignJets 1050C and 1055CM Printers Service Manual
n Print one of the internal demos or print the Print Quality Test
using HP Media and configuring the printer as indicated
previously.
n If the output obtained using the HP Solution is good and the one
obtained through the 3rd party solution is bad, HP support
organization should:
n Communicate to the customer that the problem is not in the
printer and that he should address it through the 3rd party vendor
support structure.
7 Service Accuracy Calibration
n Perform "Service Accuracy calibration" using HP High-Gloss
Photo Paper.
WARNING Do NOT use any other type of media apart from HP High Gloss
Photo Paper when performing the Accuracy Calibration.
Print Modes
The Printers have a large number of print modes. A print mode
specifies how to interpret and put on media a set of bitmap planes,
each of which consists of a sequence of rows. Each mode
corresponds to a unique combination of the following parameters:
n Print resolution (300 dpi, 600 dpi, 1200 x 600 addressable).
n Number of passes per advance.
n Number of advances per swath.
n Print direction (bidirectional).
n Carriage speed.
n Smart Area Fill (SAF).
n Print masks.
n Servicing states.
n Multiple dotting (K).
User input to print mode selection consists of the following:
n Choice of media type.
n Choice of print-quality setting (fast, normal, best).
n The language in which the file is received.
n The model of printer used.
n The type of driver (HP or Non-HP).