HP 1055CMHP - Manual (Page 255)

Removal and Installation
8-47 HP DesignJets 1050C and 1055CM Printers Service Manual
9. To release the tension on the belt (item 1) from the left hand side of
the Printer, squeeze the spring (item 2) using the tensioner wedge
clip (item 3) until you hear it click into place (refer to Figure 44).
Figure 44: Carriage Assembly and Belt
10. Remove the belt (item 1) from the belt motor pulley (item 2) on the
right hand side of the Printer (refer to Figure 45)
Figure 45: Carriage Assembly and Belt
1
2
3
C607415
1
2