HP 1055CMHP User Manual
Page 37
System Error Codes
2-3
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error:
0000D8 XXXXXXXX (Non-Continuable)
Problem
Description:
External Library Error.
Corrective Action:
Refer to System Error Code 070100.
System Error:
01002D (Non-Continuable)
Problem
Description:
The Main PCA cannot communicate with the Carriage.
Corrective Action:
Perform the Electronic Systems Test
⇒
Page 4-5.
System Error:
010020 (Non-Continuable)
Problem
Description:
Firmware DIMM Test failure.
Corrective Action:
Try the following:
n
Switch the Power OFF from the back of the Printer and
disconnect the Power cord. Reseat the Firmware DIMM,
reconnect the power cord and power On the Printer.
n
If the Error Code appears again, switch the Power OFF from the
back of the Printer, disconnect the power cord and Replace the
Firmware DIMM. Reconnect the power cord and power On the
Printer and check if the Error Code has been resolved.
n
If the System Error continues, replace the Electronics Module
⇒
Page 8-25.
WARNING
Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.