HP 1055CMHP User Manual
Page 46
System Error Codes
2-12
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error:
080001 (Non-Continuable)
Problem
Description:
PostScript Error.
Corrective Action:
Refer to System Error Code 070100.
System Error:
09xxxx (Non-Continuable)
Problem
Description:
EIO Accessories (EIO Card/Hard Disk Drive) Error.
Corrective Action:
Try the following:
n
Switch the Printer OFF and ON again and wait for the initialization.
n
If the Error code continues to appear, switch the Printer OFF.
Remove the EIO Card (if installed) and make sure that the Hard
Disk Drive is installed correctly by pushing it firmly inwards and
checking that the two installation screws are completely
tightened. Switch the Printer ON again. If the error codes 09Axxx
or 09Bxxx appear then replace the Hard Disk Drive.
n
If the Error Code disappeared after removing the EIO Card, then
switch the Printer OFF and reinstall the EIO Card, making sure
that the two installation screws are completely tightened. Switch
the Printer ON again. If the Error Code reappears, then the EIO
Card could be faulty. Replace the EIO Card.
n
If Error Code 09Cxxx appears after initialization, then replace the
Electronics Module
⇒
Page 8-25.
n
Once the Error Code has been solved, print an Internal Demo
Print to make sure that the Hard Disk Drive is functioning
correctly. If the Error Code reappears, then use the above
information to troubleshoot the problem.