Honeywell RAPID EYE K9696V2 - Manual (Page 21)

Field Work
2–3
Table 3
Panel connectors
Connector Label Description
SERIAL PORTS General-purpose serial ports, DB9 connector.
VIDEO INPUTS – IN BNC connectors for video signal cable from the cameras in a
CCTV system. A Multi-Media unit has 16 video input
connections.
VIDEO INPUTS – OUT BNC connectors to relay a video feed to either a CCTV, NTSC
or PAL monitor, VCR, or other device. The outs are capped for
delivery.
MONITOR OUTPUT 1 BNC connector; can be set to produce test pattern or a
camera tour. Also called “Video spot out” on previous version
of unit.
MONITOR OUTPUT 2 BNC connector; inoperative for this release.
MOUSE For standard mouse (supplied)
KEYBOARD For keyboard (optional)
TELCO RJ-11 connector to Multi-Media unit’s modem
USB PORT Inoperative.
PARALLEL PORT Inoperative.
LAN RJ-45 connector to unit’s 10/100 BT network card
AUDIO IN/OUT Soundcard connectors
MIC IN DISABLED; use AUDIO IN.
ALARM INPUTS Screw terminal connectors for input and ground*
connections, to interface with devices such as alarms. TTL
type: minimum high level of +2.4 volts; maximum low level of
+0.4 volts.
CONTROL OUTPUTS Screw terminal connectors for output and ground*
connections, to interface with devices such as: lights, sirens,
locks, and so on. TTL type. The outputs do not directly drive
devices; they control relays that do so.
* Control I/O must be referenced to the ground of the Multi-Media unit.
USB port and Printer port
The USB port and Printer port at the back of the REMM unit are for future use.
Do not connect USB devices or a printer to a Multi-Media unit.
2.2 Temperature
Honeywell recommends that a unit be operated in a non-condensing environment, in
temperatures ranging from 40° F to 104°F (or 5°C to 40°C).