Honeywell RAPID EYE K9696V2 - Manual (Page 44)

Multi-Media Unit: Installation Instructions
3–8
3.2.5 Record of a Network Connection
!37 To make a record of a network connection
1. Using Admin software, in the Add Site/Update Site dialog, click in the
“Connections to the Site” pane. The Add Connection dialog is displayed. The
Connection Name box appends a stylized arrow and “Network” to the site’s
name.
2. In the IP Address box, type the Multi-Media unit’s IP address. The address is the
same as the one given in the field to the Multi-Media unit; see 2.7: Network
Connection on p. 2–9.
The IP Address is mandatory for a network connection.
3. You can choose to either:
•
Leave the connection name in the Connection Name box, as it was set
automatically by Admin.
•
Type another name in the Connection Name box.
4. Click Save and Close. The Sites tab is displayed. In the tab’s Primary
Connection column, the first letter of “network” appears in parentheses: (n),
followed by the IP address used to connect to the Multi video unit.
Fig. 28. Adding a pilot connection