Honeywell RAPID EYE K9696V2 User Manual
Page 38
Multi-Media Unit: Installation Instructions
3–2
!32 To install Multi software
1. Run
the
Rapid Eye MULTI ADMIN and VIEW CD-ROM. The installation starts
automatically.
You need Administrator rights to install View to run on Windows 2000, NT or XP.
The installation program cannot update the registry if a user without this right is
running Windows.
2.
The “Rapid Eye MULTI” pane is displayed, followed by a message, asking if a
modem will be used to connect to video units in your system. See your network
administrator if you are unsure.
•
Yes. For a telephone line connection, click “yes”.
•
No. For a network connection, click “no”.
3.
The Windows operating system is checked for any missing Microsoft
components that are required to run Multi, or for older versions of Multi that
must be removed. Either:
•
a Welcome message appears. You can click Next > and go to step 4.
•
The installation stops due to a missing Microsoft component on the PC. A
message appears listing the missing component(s). Make a note of the
component(s) listed in the message. Click OK, stop using this procedure and
see the Operator Software Setup Instructions for Rapid Eye Multi-Media units,
part #K5401.
4. A
Software License Agreement appears. If you agree with the licensing
agreement, click Yes.
5.
Your name and business are displayed. Correct the information if needed, and
then click Yes.
6.
The installation program selects a drive and folder to install the Multi files.
Either:
•
accept the location and click Next >.
•
select a different folder; click Browse. Use Windows to select a drive and
folder. Click Next >.
7.
It takes a few seconds to copy the Multi files to the PC. “Setup Complete” appears at
the end of the process. Click Finish. Multi adds icons on your desktop: one for Admin
and one for View.
Installing Multi software is also explained in the Operator Software Setup
Instructions.
You have the option of installing the software before or after the fieldwork, described in
section 2, above.
Some versions of Windows need you to restart the PC.