Honeywell RAPID EYE K9696V2 - Manual (Page 46)

Multi-Media Unit: Installation Instructions
3–10
3.3.2 Running View
Logging on to View
Three pieces of information are needed:
•
user account. Use the “Administrator” account. It has the right to use all of the
functions in View. It also grants access to every Rapid Eye site in your system.
•
password. By default, there is no password for the Administrator account. You
can add a password after testing is complete. Account and system passwords
are explained and discussed in the Admin User Guide. If the password has
been changed, see the organization’s Multi SA for an account.
•
database. Use the same database used to log into Admin. See 3.2.1: Running
Admin.
Fig. 30. Your database can have the name of your choice, as long as it is the same one
used earlier, as in figure 24 on page 3–4.
3.3.3 Testing a Connection: Maintenance
Using Maintenance
Run a Maintenance session to set the Multi-Media unit’s time and configure the site’s
cameras. A successful maintenance session also indicates that the record of the site in
the Multi db is correct.
!38 To run a maintenance session on a Rapid Eye site
1. Double-click the View icon (fig. 29). The “View Logon” dialog is displayed.
2. Log on using the “Administrator” User Id and the Database as for Admin
(section 3.2.1). The Site tab in View should list the site(s) created in Admin.