Installation, Assembling the victorian face – Harman Stove Company HB 38 DV User Manual

Page 16

Advertising
background image

16

INSTALLATION

Only For Qualified Installers

Assembling the Victorian Face

1. Position the mantel face down on the floor.
2. Place the left piller over the two studs on the

left side of the mantel. Install two washers and
nuts and tighten.

3. Place the left side of the breast plate into the

slots on the left pillar.

4. Place the Left hinge pin of the top grill door

into the round hole in the pillar.

5. Place the left hinge pin of the bottom grill door

into the round hole in the bottom of the pillar.

6. Place the right pillar over the studs on the right

side of the mantel face while simultaneously
placing right ends of the doors and breast plate
into their slots on the right pillar. Some assis-
tance is helpful.

7. Install any decorative panels at this time.

Advertising