Harman Stove Company HB 38 DV - Manual (Page 36)

36
MAINTENANCE
Air In
Air Out
The flow of combustion and ventilation air
must not be obstructed
Oil Holes
Cleaning the Burners
To clean the burners the face, glass front, and
logs must be removed. Remove the front burner as-
sembly and rear burner as described on page 22. Re-
move the front burner from the assembly by loosen-
ing the clamping plate on the bottom.
With both burners removed, inspect all the hole
to make sure they are unobstructed. Use a small drill
or wire to clean any obstructed holes. Remove any
rust or other buildup that may have accumulated.
Replace burners in reverse order.
Lubrication
The Serenity Fireplace does not require lubri-
cation other than the blower. One or two drops of
light oil may be put in the two oil holes on the blower
motor. This is not critical and should only be done
every year or two. Too much oil is worse than no
oil.
Air Flow
It is essential the air flows freely into the bot-
tom grill and out of the top grill. Do not place ob-
jects in front of the grills.
Check blower annually for buildup caused by
dust and pet hair.