Honeywell HCE 60 User Manual
Page 17
Advertising
Configuration and electrical connection
15
Setting actuator
Only one type of actuator can be connected to a storey con-
troller at a time. If actuators which are open with current and
actuators which are closed with current are to be used, 2
storey controllers with the respective suitable controller are
required.
1. Configuration
switch
(O = Open, C = Closed)
2. Setpoint temperature of
ceramic fuse (type:
230 V AC; 2.5 A, fast-
blowing; 5×20 mm)
The actuators are protected by the ceramic fuse.
►
Check the type of actuator being used.
►
Set the switch according to the following table.
Advertising