Hand Held Products 4410 - Manual (Page 111)

3 - 41
2D Matrix Symbologies
VeriCode, continued
VeriCode Size
This selection allows you to program the Imager to read fixed VeriCode symbol
sizes. If your application requires that the Imager read one fixed size, scan one
of the Size menu symbols and the size (from 10 to 48, even numbers only). The
size you set will be the only one turned on. If you need more sizes turned on (up
to 3), scan another Size menu symbol and the required size(s).
Default = 0 or
Off (all sizes turned on).
A one- to two-digit number and Save are required after reading this
programming symbol. Refer to the Programming Chart (inside back cover).
Size B
Size A
Size C
Size E Size D