Hand Held Products 4410 - Manual (Page 45)

2 - 25
Presentation Mode
This programs the scanner to work in Presentation Mode.
Presentation Re-trigger Delay
This sets the time period before the scanner can re-trigger for another read
attempt. Setting a re-trigger delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads at
POS (point of sale). Use shorter delays in applications where repetitive bar code
scanning is required. Entries are in milliseconds, up to 10,000.
Default = 500.
Presentation Lights
When using the scanner in presentation mode, the illuminating LEDs can be
programmed on or off. If there is sufficient ambient light, the LEDs can be turned
off by scanning the Lights Off bar code below. When a bar code is presented to
the scanner, the illuminating LEDs turn on to scan the bar code and then turn off
when the bar code has been read.
Default = Presentation Mode Lights On.
Presentation Default
Defaults all presentation mode settings. Defaults = Presentation Mode Off,
Presentation Reread Delay 200 ms.
On * Off
Presentation Re-trigger Delay
* On Off
Presentation Default