Humax L3040 - Manual (Page 19)

19
Turn on the product you want to control.
Press the MENU + SEL buttons simultaneously for 2
seconds (until the function icons appear).
The MBR icon will appear and blink.
Press the SEL button. The word TV will appear in the
product indication window.
Using the
buttons, select the product you want
to control (TV, VCR, DVD, CBL, SAT). Note that you
cannot set up the MBR for MNT.
Press the SEL button. The sign --- will appear in the
product indication window.
Refer to the "MBR Code Table" to find the product's
corresponding code, then input the three-number code
in sequence.
Press the SEL button. The current code is saved and
the OK! sign appears.
Press the CANCEL button to finish the setup. Test the
remote control.
If the remote control doesn't work with the product,
return to step 2 above and set up the MBR repeatedly
until you find the correct code.
To stop the process during the MBR setup, press the
CANCEL button.
If the remote control doesn't work after you have input
all the codes in the "MBR Code Table," refer to CASE
2 on the following page.
CASE 1
Follow the process below when you know the remote control code of
the product you want to control, or when you have the code table as on
page 58~60.
How to Control Other Brand Products
Setting Up the MBR