Humax L3040 - Manual (Page 24)

24
Basic operation
Connect the Power Cord to the AC input on the back of your
LCD TV.
Insert the Plug for the LCD TV into a nearby electrical outlet.
The standby indicator lights up on the front panel.
Press the POWER ( ) button on the remote control.
The LED lamp will change to light off and your
LCD TV will be turned on.
To switch your LCD TV off, press the POWER ( ) button
again.
1
2
3
Turning the LCD TV On and Off
4
Status Lamp
Standby Mode Blue
Power On Light off
Power Saving Flickering
Indicator Lights
With the power on, press the MENU ( ) button on the
remote control.
The main menu appears on the screen.
Use the or button to move the cursor on the OSD menu.
Use the or button to adjust the selected items.
Use the SEL ( ) button to select the sub-menu.
1
2
3
Viewing the OSD Menu
The OSD(On-Screen Display) disappears automatically
after a few seconds without pressing other buttons or
you can also press the MENU button to return to the
previous menu or press the MENU button once or more
to exit the OSD.