Humax L3040 - Manual (Page 55)

55
Mode Command Remark
Power pwr=0 power off
pwr=1 power on
Source inp=rf
inp=vid
inp=svd
inp-rgb
inp=yuv
inp=vga
inp=dvi
Volume vol=12
Contrast
con(rf)=24
Brightness bri(vid)+16 Range 0~31
Color col(vga)-10
Tint tin(rf)=?
IR Spoofing sir=vup vup=volume up button
sir=vdn vdn=volume down button
sir=mnu mnu=menu button
sir=aup aup=arrow up button
sir=and and=arrow down button
sir=alt alt=arrow left button
sir=art art=arrow right button
sir=ke0 ke0=number pad 0
sir=ke1 ke1=number pad 1
sir=ke2 ke2=number pad 2
sir=ke3 ke3=number pad 3
sir=ke4 ke4=number pad 4
sir=ke5 ke5=number pad 5
sir=ke6 ke6=number pad 6
sir=ke7 ke7=number pad 7
sir=ke8 ke8=number pad 8
sir=ke9 ke9=number pad 9
Red gain gar(vga)+178
Green gain gag(vga)=? Range 0~255
Blue gain gab(dvi). 57
Miscellaneous ind=0 .ind. display information mode
ind=1 .0. infor off
.1. infor on
mnu=0 .mnu. on screen display mode
mnu=1 .0. menu off
.1. menu on
General RS-232C command structure
• Refer
1) Red, Green, Blue gains operate only RGB, DVI mode
2) + increase value
– decrease value
= change into input value
? return to previous value before change
3) rf = TV, vid=VIDEO, svd=S-VIDEO, rgb=COMPONENT1, yuv=COMPONENT2, vga=RGB, dvi=DVI
Refer to 1)
Refer to 1)
2)
Refer to 1)
2)
3)