Humax L3040 - Manual (Page 20)

20
Turn on the product you want to control.
Press the MENU + SEL buttons simultaneously for 2
seconds (until the function icons appear).
The MBR icon will appear and blink.
Press the SEL button. The word TV will appear
in the product indication window.
Using the
buttons, select the product you want
to control (TV, VCR, DVD, CBL, SAT). Note that you
cannot set up the MBR for MNT.
Press the SEL button. The - - - sign will appear in the
product indication window.
Press the OR button at 1-second intervals. Each
time you press the button, a new signal is transmitted.
As soon as the product turns off, release the button.
Press the SEL button. The OK! sign appears, the
current code is saved, and the setup process
automatically returns to step 5. If you want to set up
another product, repeat steps 5 to 7. When you have
completed the MBR setup up process, press the
CANCEL button.
Test whether the remote control works with the
product. If not, return to step 2 above and set up the
MBR repeatedly until you find the correct code.
To stop the process during the MBR setup, press the
CANCEL button.
CASE 2
Follow the process below when you don't know the remote control code
of the product you want to control, or when you don't have the code
table as on page 58~60.
Setting Up the MBR