Humax L3040 - Manual (Page 28)

28
Direct Access Features
Using the FAV button to select the previous channel
Press the FAV button on the remote control.
The LCD TV will switch to the last viewed channel.
1
1 Press the VOL+ or VOL- button to increase or decrease the
Volume on the remote control.
Adjusting the Volume
50
Switching the Sound Off Temporarily
You can temporarily cut off the sound using the Mute button.
Press the MUTE button on the remote control.
The sound is switched off and " Mute" is displayed.
When you wish to turn the sound back on, press the MUTE
button again.
1
2
Mute
Press the CH or CH button to selecting channels.
When you press the or button, the LCD TV
changes channels in sequence. But you will not see
channels that were either erased or not memorized.
1
Selecting Channels
After adjustment: Press the MENU button to exit.
Using the Channel Buttons
Press the numeric buttons to select directly to a channel.
Two digit channel selection:
For example, to select channel 36, press 3 then 6.
Three digit channel selection:
For channel 115, press 1, then 1, then 5 or press 100
button and then 1, then 5.
1
Using the Direct Access Buttons