Humax L3040 - Manual (Page 53)

53
Serial Control Using RS-232C
Serial Control Using RS-232C Cable (optional)
Use RS-232C cable when you control the LCD TV using the PC.
This function is called PC Remote Control and is the same as the physical Remote control.
It will provide you an additional convenience when you use the LCD TV connected with a PC.
(The RS-232C cable is not included with the LCD TV. Separately sold RS-232C cable is required.)
First, connect the RS-232C cable between the PC and the LCD TV RS-232C input port. Refer to
the following method for using this function.
Installing Hyper terminal
From the Windows original disks.
On most Windows 95/98/2000 machines, Hyper-
terminal should be installed without explicitly
requesting it. If you need to install a copy of the
standard Hyperterminal program, go to the Start
menu, chose the setting option, and click on
Control Panels option.
Double Click on the Add/Remove Programs icon
and click on the Windows Setup tab at the top of
the window. Hyperterminal is located in the
Communications group.
Using the Hyper terminal
The program that starts Hyperterminal is
HYPERTRM.EXE. It is located under Start Menu;
Go to Start Programs Accessories
(communications) Hyperterminal.