HP 1215 - Manual (Page 107)

Troubleshooting
www.hp.com/photosmart 101
Paper size mismatch. Load
correct paper size. Press
OK to continue or press
CANCEL to cancel the job.
The paper size has
changed in the middle of
the job.
Load the correct sized paper, and then press OK/Yes .
Media scan failed. Press
OK to retry or press
CANCEL to cancel the job.
The printer cannot detect
the size of the paper in the
paper tray.
In the printer settings, override Automatic paper size by selecting the
appropriate paper size.
Wrong paper size.
Cropping may occur. Press
OK to continue. Or you can
CANCEL the job.
The size of paper to be
printed does not match the
specified size.
• Load appropriate sized paper, then press OK/Yes to continue.
OR
•
Press Cancel/No to quit the print job.
Transfer was interrupted.
Photo transfer was
interrupted.
The infrared transmission of
files from the IR device has
been interrupted.
1. Press OK/Yes .
2. Resend the file.
PC data was not received.
check PC connection. Press
OK to continue.
The printer has not received
data sent from the
computer.
Check that the connection cable is securely attached to the printer
and to the computer.
Use only 1 card. Please
remove a memory card.
The printer can access only
one memory card slot at a
time.
Remove one of the memory cards from the printer.
LCD Message Problem Solution