HP 1215 - Manual (Page 23)

www.hp.com/photosmart 17
Chapter 2 Getting to know your printer
Adjusting printer settings
You can use the Tools button on the printer’s front panel to print a test page or
adjust the printer’s settings.
Note: An asterisk (*) on the LCD indicates the current setting.
Printing a test page
You can print a test page to check your print cartridges and make sure the paper is
loaded correctly.
To print a test page:
1. Make sure plain paper is loaded in the paper tray. If you need more
information, see “Loading paper” on page 11.
2. On the printer front panel, press Tools until the LCD
asks if you want to print a test page, then press
OK/Yes .
The printer begins printing a test page.
Page size
By default, the printer automatically detects paper type and size by scanning the paper
in the paper tray. You can also choose to override the automatic detection by manually
setting paper type and size.
Depending on where you live, you may need to set the printer to use a particular small
or large paper size. If you live in Japan, you need to set the default small paper size to
either Hagaki or 4 x 6 inches. If you live in any other Asian or Pacific country, you need
to set the default large paper size to either A4 or 8½ x 11 inches.
OK/Yes
button
Tools
button
LCD
Test page