HP 2605dtn User Manual
Page 113
7.
Press (
Left arrow
) or (
Right arrow
) to enter the first three digits of the IP address.
8.
Press (
Select
) to save those digits and move to the next three digits of the IP address.
9.
Press (
Left arrow
) or (
Right arrow
) to enter the next three digits of the IP address.
10.
Press (
Select
) to save those digits and move to the next three digits of the IP address.
11.
Press (
Left arrow
) or (
Right arrow
) to enter the next three digits of the IP address.
12.
Press (
Select
) to save those digits and move to the next three digits of the IP address.
13.
Press (
Left arrow
) or (
Right arrow
) to enter the next three digits of the IP address.
14.
Press (
Select
).
15.
The control panel will display Yes. Press (
Select
) to save the configuration, or to delete and
re-enter another IP address, press (
Left arrow
) or (
Right arrow
), which will change the
display to No.
16.
After selecting the IP address, you will be prompted to enter the subnet mask and default
gateway using steps 7-14 above.
17.
If at any time during the configuration you press
(
Cancel Job
), the system will exit the menu
and the addresses will not be saved.
ENWW
Network: How do I?
101