HP 2605dtn - Manual (Page 169)

Problem Cause Solution
Print is light or faded. The media might not meet
HP specifications. Use media that meets HP specifications.
One or more print cartridges might be
low. If you are using non-HP print
cartridges, no messages appear on the
printer control panel or in the
HP ToolboxFX. Replace any low print cartridges. See
Changing print cartridges .
If none of the print cartridges is low or
empty, remove the print cartridges one
at a time and inspect the toner roller in
each to see if the roller is damaged. If
so, replace the print cartridge.
Print the Supplies Status page to check
the remaining life. See
Supplies Status
page .
Toner specks appear. The media might not meet HP
specifications. Use media that meets HP specifications.
The paper path might need cleaning. Clean the paper path. See the
HP ToolboxFX online Help.
Dropouts appear. A single sheet of print media might be
defective. Try reprinting the job.
The moisture content of the paper is
uneven or the paper has moist spots
on its surface. Try different paper, such as high-
quality paper that is intended for color
laser printers.
The paper lot is flawed. The
manufacturing processes can cause
some areas to reject toner. Try different paper, such as high-
quality paper that is intended for color
laser printers.
Vertical streaks or bands appear on the
page. One or more print cartridges might be
low or defective. If you are using non-
HP print cartridges, no messages
appear on the printer control panel or
in the HP ToolboxFX. Replace any low print cartridges.
ENWW Print problems 157