HP 2605dtn User Manual
Page 50
When connected with a USB cable, the printer does not appear in the Print Center or Printer Setup Utility after the driver is
selected.
Cause
Solution
Hardware troubleshooting
●
Check that the printer is turned on.
●
Verify that the USB cable is connected correctly.
●
Check that you are using the appropriate high-speed USB
cable.
●
Ensure that you do not have too many USB devices drawing
power from the chain. Disconnect all of the devices from the
chain, and connect the cable directly to the USB port on the
host computer.
●
Check to see if more than two nonpowered USB hubs are
connected in a row on the chain. Disconnect all of the devices
from the chain and connect the cable directly to the USB port
on the host computer.
NOTE
The iMac keyboard is a nonpowered USB
hub.
Table 3-1
Problems with Mac OS X (continued)
38
Chapter 3 Software for Macintosh
ENWW