HP 2605dtn User Manual

Page 156

Advertising
background image

Control panel message

Description

Recommended action

Load tray 1

[TYPE] [SIZE]

Memory card is

in backwards

The memory card was inserted backwards
into the card slot.

Remove, turn, and reinsert the card.

Memory is low

Press

The printer memory has been almost
completely filled.

Allow the printer to finish the job, or press

the

(

Select

) button to cancel the job.

Break the job into smaller jobs that contain
fewer pages.

Misprint

Press

The printed pages have been incorrectly
placed on the paper.

To continue, press the

(

Select

) button

on the control panel.

No paper pickup

Press

The print engine has failed to pick up a
piece of media.

In Tray 1, verify that the media was inserted
far enough into the tray. In Tray 2 or
optional Tray 3, verify that the paper-length
guide is in the correct position for the media
size that you are using.

Reload the media in the input tray and

press

(

Select

) to continue the job.

If the error persists, contact HP Customer
Care. See

HP Customer Care

or the

support flyer that came in the printer box.

Only 1 memory

card at a time

More than one memory card has been
inserted.

Remove all but one memory card.

Page too complex

Press

The page is too complex for the printer to
process.

Press the

(

Select

) button and try to

reprint the page.

For multiple page jobs, print pages
separately.

Photo job

pending

Second photo job was started prior to
completion of the first job.

No action required. Message will cease
when first job completes.

Photos not

found

An image has been selected that has been
deleted.

The image checked on the bubble sheet
has been deleted.

Memory card has been removed from the
memory slot.

Reinsert the card and reselect the image.

Replace supplies

Override in use

A supply is low and using Override may
result in unsatisfactory print quality.

Replace the supply that is low.

Unauthorized yellow

Unauthorized magenta

A new supply has been installed that is not
made by HP. One of these four messages
is displayed until an HP supply is installed

or

(

Select

) is pressed.

If you believe you purchased an HP supply,
please call the HP fraud hotline at
1-877-219-3183. Service or repairs

Table 12-1

Alert and warning messages (continued)

144

Chapter 12 Problem solving

ENWW

Advertising
This manual is related to the following products: