HP 2605dtn - Manual (Page 131)

Paper handling
Use the HP ToolboxFX paper-handling options to configure your default settings. These are the
same options that are available on the System setup and Paper setup menus on the control-panel.
For more information, see
Control panel menus .
Three options are available for handling print jobs when the product is out of media:
● Select Wait For Paper To Be Loaded.
● Select Cancel from the Paper out action drop-down list to cancel the print job.
● Select Override from the Paper out time drop-down list to send the print job to another paper
tray.
The Paper out time field specifies how long the printer waits before acting on your selections. You
can specify from 0 to 3600 seconds.
NOTE You must click Apply before your changes take effect.
Printing
Use the HP ToolboxFX printing settings options to configure the settings for all print functions. These
are the same options that are available on the Print Settings menu on the control panel. For more
information, see
Control panel menus .
NOTE You must click Apply before your changes take effect.
PCL5e
Use the PCL5e options to configure the settings when you are using the PCL5e print personality.
These are the same options that are available on the PCL5e menu on the control panel.
NOTE You must click Apply before your changes take effect.
ENWW HP ToolboxFX 119