HP 2605dtn - Manual (Page 133)

● Midtones. Midtone colors are about halfway between white and solid density. To make midtone
colors darker, use a positive midtone setting, and to make midtone colors lighter use a negative
highlight setting. This adjustment does not affect highlight or shadow colors.
● Shadows Shadow colors are colors near solid density. To make shadow colors darker, use a
positive shadow setting, and to make shadow colors lighter use a negative shadow setting. This
adjustment does not affect highlight or midtone colors.
Paper types
Use these HP ToolboxFX Paper types options to configure print modes that correspond to the
various media types. When you select Restore Modes, all of the modes are reset to the factory
settings.
NOTE You must click Apply before your changes take effect.
Memory card (HP Color LaserJet 2605dtn)
Use the HP ToolboxFX memory card options to configure print settings when using memory cards.
Three options are available for configuring the printer when using memory cards.
● Photo image size. Select the size photos to print from the drop-down list.
● Photo number of copies. Type the number of copies from 0 to 99 to print for each image.
● Photo output color. Select either Color or Monochrome from the drop-down list.
Click the Enable memory cards checkbox to save the settings.
ENWW HP ToolboxFX 121