HP 2605dtn - Manual (Page 145)

To clean the paper path using HP ToolboxFX
NOTE Use the following procedure to clean the paper path using the HP ToolboxFX. To
clean the engine when the computer is running an operating system that does not support
HP ToolboxFX, see the late-breaking Readme on the root of the CD-ROM, or visit
http://www.hp.com/support/clj2605 .
1. Make sure that the printer is turned on and in the Ready state.
2. Open the HP ToolboxFX.
3. On the Troubleshooting tab, click Maintenance, click Cleaning Page and then click Print. A
page with a pattern prints from the printer.
4. At the printer, remove any print media in Tray 2 or optional Tray 3.
5. Remove the page that printed and load it face-down into Tray 2 or optional Tray 3.
6. At the computer, press Clean.
ENWW Cleaning the printer 133