Cartridge out override, Configuration, On-going operation – HP 2605dtn User Manual
Page 146: Configuration on-going operation
Cartridge out override
What is it?
The HP Color LaserJet 2605 series printers display an Order supplies message when a cartridge is
running low and a Replace Supplies message when a cartridge has been depleted. To ensure
optimal print quality, HP recommends replacing a cartridge when the Replace Supplies
message is displayed. Replacing the cartridge at this point can help prevent waste of media or
other cartridges when one cartridge produces poor print quality.
The Cartridge Out Override feature allows the printer to continue using a cartridge that has reached
the recommended replacement point.
WARNING!
Using Override may result in unsatisfactory print quality and unavailability of
certain features (such as toner remaining information).
WARNING!
All print defects or supply failures incurred when an HP supply is used in
Override will not be considered defects in materials or workmanship in the supply under HP's
Print Cartridge Limited Warranty Statement. For Warranty information, see
Configuration
Cartridge Out Override can only be enabled from the printer's control panel menu.
1.
From the main menu, press (
Right arrow
) to System setup and press (
Select
).
2.
Press (
Right arrow
) to Print quality and press (
Select
).
3.
Press (
Right arrow
) to Replace Supplies and press (
Select
).
4.
Press (
Right arrow
) to Override out and press (
Select
).
5.
Press (
Select
).
If Stop at out is selected, the printer will stop printing when a cartridge reaches the recommended
replacement point. If Override out is selected, the printer will continue printing when a cartridge
reaches the recommended replacement point. The factory default setting is Stop at out.
On-going operation
Override can be enabled or disabled at any time, and does not have to be re-enabled for each
cartridge. The printer will automatically continue printing when a cartridge reaches recommended
replacement. The printer will display a message Replace supply Override in use while a cartridge
is used in Override mode. When the cartridge is replaced with a new supply, Override will de-activate
until another cartridge reaches recommended replacement.
134
Chapter 11 Maintenance
ENWW