Checking dimm installation – HP 2605dtn User Manual
Page 184
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
1.
Turn the printer on. Check that the Ready light is on after the printer has completed the startup
sequence. If an error message appears, a DIMM might have been incorrectly installed.
2.
Print a Configuration page by pressing (
Select
) and
(
Cancel Job
) simultaneously. (A
Supplies Status page and possibly an HP Jetdirect Configuration page also print.)
3.
Check the Installed Personalities and Options section on the Configuration page and compare it
with the Configuration page printed before the DIMM installation.
4.
If the amount of recognized memory has not increased or the font DIMM is not recognized, the
following conditions might exist:
●
The DIMM might not be installed correctly. Repeat the installation procedure.
●
The DIMM might be defective. Try installing a different DIMM.
5.
After you have installed the DIMM correctly, go to
if you installed a memory
Enabling the language-font DIMM for Windows
if you installed a language-font DIMM.
172
Chapter 13 Working with memory
ENWW