HP 2605dtn - Manual (Page 35)

HP Web Jetadmin
This software is available only when the printer is connected to a network.
HP Web Jetadmin is intended for printer management in commercial and enterprise networks. While
the HP ToolboxFX is used to manage a single printer, HP Web Jetadmin is used to manage groups
of printers and other devices. Download this software from the HP website at
http://www.hp.com/go/
webjetadmin . The HP Web Jetadmin website provides HP Web Jetadmin software in many
languages.
HP Web Jetadmin is available only if the printer is connected to an Internet protocol- (IP-) based
network. This browser-based software can be installed on one of the following supported platforms:
● Microsoft Windows 2000 or XP
● Red Hat Linux
● SuSE Linux
After you install the HP Web Jetadmin software, you can start it in a supported Web browser on any
computer by typing one of the following Web addresses:
● http://server.domain:port/
where server.domain is the server hostname and port is the port number that you selected
during installation. (The default port is 8000.) This information is available in the url.txt file, which
is stored in the folder where HP Web Jetadmin is installed.
● http://ipaddress:port/
where ipaddress is the IP address of the computer on which HP Web Jetadmin is installed.
For settings that appear in both the printer driver and HP Web Jetadmin, changes that are made in
the printer driver override changes that are made in HP Web Jetadmin.
ENWW HP Web Jetadmin 23