Husqvarna DXR-310 - Manual (Page 30)

General
IMPORTANT!
Please read the operator’s manual carefully
and make sure you understand the instructions
before using the machine. You should also read
and understand the manual that accompanies
the tool.
Ensure that the tool’s and the machine’s per-
formance (weight, hydraulic pressure, fl ow etc)
are compatible.
Bucket
The bucket is designed to move material. It is not
designed for use as a lifting implement.
Hydraulic hammer
The hydraulic hammer is designed for demolition
by means of hewing. It is not designed for use as a
crowbar. Continuous hewing with the hydraulic ham-
mer can result in high temperatures in the hydraulic
system.
Concrete cutter
The concrete cutters are designed to crush and cut
material in their jaws. They are not designed for pulling
and prizing loose material.
TOOLS
Work mode
You can select which tool you want to work with in the
work menu - hammer, concrete cutter or concrete cut-
ter with increased work pressure.
NB! There is a risk of damage to the machine if, for
example, the work pressure is delivered to a single-
acting tool’s return side, or if the machine’s or the
remote control’s settings are not correct for the tool in
question. There is more information about the remote
control’s settings in the “Control system” section.
30
- English