Husqvarna DXR-310 - Manual (Page 46)

Oil fi lter
IMPORTANT!
Allow the machine to cool. Hot oil can cause
severe burn injuries.
• Undo the air fi lter so that the overpressure in the
tank is discharged.
• Thoroughly clean the outside of the fi lter and the
surrounding parts.
• Remove the fi lter cover. Lift up the sealing ring, the
spring and the fi lter holder together with the fi lter
cartridge.
• Remove the fi lter cartridge from the fi lter holder.
• Check whether there is an unusually large amount
of large metal particles or sealing compound in
the fi lter holder. If this is the case the machine’s
hydraulic system must be checked for faults.
• Clean the fi lter holder with degreasing agent. Rinse
with warm water and blow dry using compressed
air.
• Install the new fi lter in the fi lter holder and put it in
the tank. Install a new sealing ring.
• Install the spring and the fi lter cover.
Air fi lter
• Thoroughly clean the outside of the fi lter and the
surrounding parts.
• Replace the fi lter.
46
- English