Husqvarna DXR-310 - Manual (Page 32)

SETTINGS
Track widener
The machine is equipped with track wideners for
increased stability when working with the machine.
Width with track widener: 1110 mm (44 in)
Width without track widener: 780 mm (31 in)
Fitting the track widener
• Let down the outriggers.
• Shut off the machine. Disconnect the power
cable and place it so that it cannot be connected
by mistake.
• Remove the nuts (A).
• Loosen bolts (C) and nuts (B).
• Move washer (D) to the side.
• Pull the side of the tracks out a suffi cient distance
to enable the track widener to be fi tted.
• The holes of the track widener must be facing the
machine.
• Move the side of the track towards the machine.
• Tighten bolts and nuts.
To dismantle, follow the instructions in the reverse
order.
32
- English