Husqvarna DXR-310 - Manual (Page 37)

MAINTENANCE AND SERVICE
Service schedule
The service schedule is based on the machine’s operating time. More frequent service intervals might be necessary
when working in dusty or hot environments and in conjunction with work that generates high temperatures.
A description of how the operations are to be performed is to be found in the service review.
Daily inspection
Daily maintenance must also be carried out after transportation.
Lubrication
Cylinders and shafts in arm system and tool attachment
Tools
Cracks
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm systems and tool attachment
Tools
Mountings
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Tool
Level check
Hydraulic fl uid
Hammer lubrication
Wear and damage
Cylinders and shafts in arm system and tool attachment
Visible hoses (arm system, outriggers etc)
Power cable, connectors and sockets
Leakage
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Visible hoses (arm system, outriggers etc)
Tool
Function
Cylinders and shafts in lower part and outriggers
Cylinders and shafts in arm system and tool attachment
Power cable, connectors and sockets
Tool
English - 37