Hitachi SH-G1000 - Manual (Page 134)

Section 2: Understanding Your Device
126 2H: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
In addition to Voice Command SM (see page 203), you can use Voice Dial to
dial a phone number stored in Contacts.
Calling by Name
1. Press the Voice button.
2. Say a name in Contacts.
3. Say “Yes” if recognized correctly.
Calling by Phone Number
1. Say “Dial a number.”
2. Say a number.
3. Say “Yes” if recognized correctly.
Note: Recognition may fail in the noisy places. For example, in the
running automobile.
Tip: Voice Dial may fail recognition depending on conditions. If this is the
case, try the following:
• Open the Recog tab on the VoiceDial Settings screen (page 127),
and perform adjustments for Recognition performance and
Recognition rejection.
• If names in contacts are not recognized well, place a checkmark in
Contacts only in the Contacts tab on the VoiceDial Settings (page 127).
Or try registering your voice (nickname feature) in the Contacts tab.