Hitachi SH-G1000 - Manual (Page 226)

Section 4: Safety Guidelines and Warranty Information
218 4A: Safety
ᮣ Do not use your fingernails to open any lids or operate any switches on
this device. Injury to your fingertip may result.
ᮣ Insure that the plug is snugly inserted into the outlet. Fire or
malfunction may result.
ᮣ If charging the device in a room of too hot ambient temperatures, the
LED for charging will illuminate red and charging will stop. Resume
charging in an ambient temperature from 32º F to 95º F (0º C to 35º C).
If the red LED remains illuminated, remove the AC adapter, remove the
battery (all data may be lost), and contact your nearest Sprint-
authorized service center.
ᮣ Before moving this device while it is charging, always remove the AC
adapter from the outlet. Damage to the cord, fire, or electric shock may
result.
ᮣ Always grip the electrical cord by its plug when pulling it out of an
outlet. Pulling it out of an outlet by the cord can lead the inner wire to
be exposed or broken. Fire or electric shock may result.
ᮣ When not using this device for long periods of time, always remove the
electrical cord from the outlet for safety. Insulation wear, fire, or
electric shock may result. Also, insure that all data is previously
backed-up.
ᮣ When traveling abroad, never plug the AC adapter into a power source
that does not correspond to both the voltage and the frequency
specified on the rating plate of the AC adapter, as device damage and
fire will result. The supplied AC adapter cable is an AC 125 V type and
should not be connected to a power source exceeding 125 volts. Fire
may result. Connecting to a power source that exceeds 125 volts should
only be done using a cable suitable for that voltage.
ᮣ Do not use AC adapters or electrical cords not specifically designed for
this device. Do not modify or disassemble the AC adapter. Fire,
malfunction, or bodily injury may result.
ᮣ Do not press strongly on or hit the touch screen. Electrical shock or
malfunction may result.