Hitachi SH-G1000 - Manual (Page 80)

Section 2: Understanding Your Device
72 2B: Using Your Phone
Turning the Phone ON and OFF
1. Press the Power button to turn the device on, and then press and hold
the Power button to turn the phone on. To turn the phone off, press
and hold the Power button again. To turn the device off, press the
Power button again.
Tip: You may also press and hold the End key to turn the phone on and off.
Tip: You can also turn the phone on by tapping the Signal indicator,
instead of pressing and holding the Power button. If you want to make
absolutely sure you do not receive calls, such as when you are on an
airplane, tap the Signal Indicator again and then tap
Turn phone off .
(The Signal Indicator, located in the navigation bar, indicates whether
your phone is on, receiving a signal while on, turned off, and so on.)
2. Press the Talk button. The dialer screen appears and the device is ready
to make a phone call.
ᮣ When the phone is on, the LED for Phone Power blinks at intervals of
approximately five seconds.
Displaying Your Phone Number
In case you forget your phone number, your PCS Phone can remind you.
To display your phone number:
Ⅵ Tap Tools , Options , then the Phone tab on the bottom.
Tip: You may use the following procedure instead: Tap , then Settings.
On the Personal tab, tap Phone, then the Phone tab on the bottom.